Factory Cheap Hot Magnetic Formwork - Inserted Sockets Magnets SX-CZ50 Precast Concrete Embedded Threaded Bushing Magnet – Saixin

SX-CZ50 are designed for fixing embedded threaded bushing in precast concrete production.
Using SAIXIN insert magnets to fix the embedded parts, magnets secure the parts against sliding and slipping. Our products are durable, cost-saving, easy-to-use and efficient.

For magnetic assemblies, factors including but no limit to dimensions, coating quality, holding force are very important. Even with a slight defection, it may impact its performance. We fully understand this and we equipped with a complete series of quality inspection equipment and tools(pull force tester, salt spray tester, Gauss meter and fluxmeter etc) to ensure no defetive products going to our customers.

Our products reach the standard, and according to your demand, we can match the thread, including M10,M12,M14,M16,M18 etc. all of the thread will be used the good quality steel, you can check the quality that providing you free samples.

At the bottom of insert magnet, you can find the black glue, it is made the circle shape and tightly connect, so the magnet that in the middle of body can keep catching up the metal body, all the metal body and magnet surface will keep clean and no scratch, it is our products Consistent standard, so you do not worry, you can try to contact us even if as an reference supplier, we will do our best to service for you, welcome to visit our factory, and show room will be opened any time.

In addition, all the products will be updated every year, and meet marketing and clients requirements. As an factory that can provide the better service and quality. 

SAIXIN® insert magnet is made of permanent neodymium magnets, combining with steel, rubber or nylon can be made almost any shape to fix embedded part in precast concrete production.

As using, the magnetic surface fix on the platform or steel shuttering, another side fix the embedded part, because of the high suction force, the embedded part can stay accurately in the precast concrete element.

SAIXIN ® series insert magnets products with the advanced magnet protection system, can effectively protect the magnet from corrosion from outside material, improve the abrasion resistance, then improve the service life of the magnet.

(1) In order to avoid the insert magnet damaging, do not crash and use hard tools to knock it.

(2) The touching surface should be kept clean and smooth.

(3) After using, clean the insert magnets. Max working and storage temperature should be below 80℃,and no corrosive medium around.