Ukuvala iMagnet yeConcrete Formwork System

Shuttering Magnet for Concrete Formwork System Featured Image

Inkcazelo emfutshane:

Ukufunxa ngokuthe nkqo: ≥1800kgsUbukhulu: 29 x 12 x 6 cmN.W.: 7.2kgsSisetyenziswe neadaptha elungiselelwe wenaKulungele ukulungisa zonke iindidi zokungunda ezimilise okwezodwa kunye nokungunda okukhuluUbude obufanelekileyo bokungunda kuyacetyiswa: 100-250mmSikuphela komenzi wamaTshayina ukwenza oku. inxalenye, kwaye unikeze umgangatho ophezulu kodwa ...

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukufunxa nkqo: ≥1800kgs

Ubungakanani: 29 x 12 x 6 cm

NW: 7.2kgs

Isetyenziswe ngeadaptha elungiselelwe wena

Kufanelekile ukulungisa zonke iintlobo ze-mold-shaped mold kunye ne-mold enkulu

Ubude obufanelekileyo bokubumba bucetyiswa: 100-250mm

Sikuphela komenzi waseTshayina ukwenza le nxalenye, kwaye sibonelela ngomgangatho ophezulu kodwa ixabiso elikhuphisanayo xa lithelekisa nomenzi waseYurophu.Sikwanomdla wokuphuhlisa isimbo esitsha ngokwemfuno yabathengi.

Sinala malungu esitokhweni kwaye wamkelekile kwiodolo yakho yesampulu.Uya kufumana ukuba singoyena mthengisi ulungileyo wale nxalenye malunga nomgangatho kunye neendleko.

Ibhokisi yemagnethi yekhonkrithi ye-precast yindibano entsha yamagnetic esetyenziselwa ukulungisa i-formwork kwishishini le-precast.Le ndibano iqulathe iimagnethi ezomeleleyo ze-neodymium kunye neepleyiti zentsimbi ezithi ziyilwe kwisekethe ethile eyilelwe yimagnethi.Le sekethi kazibuthe inika amandla ancamathelayo anamandla nakweyiphi na intsimbi yokusebenza.Kodwa amandla emagnethi akhuselekile kwaye alawulwa yibhokisi yentsimbi eshinyeneyo.Siphuhlisa iqhosha lokutyhala ON/OFF ukuvula okanye ukuvala amandla ombane ngaphandle kwebhokisi.

IINZUZO EZINGUNDOQO ZOKUVALA IIMBONI:

1. Ukunciphisa ubunzima kunye nexesha lokufakwa kwefomwork (ukuya kwi-70%).

I-2.Ukusetyenziswa ngokubanzi kwimveliso yobuninzi beemveliso zekhonkrithi, kunye neemveliso zeengcezu zazo zonke iifom kwitafile yentsimbi efanayo.

3. Ukuphelisa imfuno ye-welding, i-shuttering magnets ayilonakalisi itafile yentsimbi.

4. Yenza kube lula ukuvelisa iimveliso zeradial.

5. Ixabiso elincinci leseti yeemagnethi.I-avareji yentlawulo malunga neenyanga ezi-3.

6. Inzuzo ephambili yeemagnethi zokuvala kukuba akudingeki ukuba ube neefom ezininzi ezahlukeneyo zeemveliso ezahlukeneyo, kufuneka ube nesethi yamagnethi, i-adapters kwiibhodi zokuphakama ezahlukeneyo kunye netafile yensimbi.

800 800-1