Shuttering Magnet, 600KG Precast Concrete Magnets don Tsarin Tsarin Tsarin Tsarin Ginin Ginin

SX-600B SHUTTERING MAGNET

Tsatsa a tsaye: ≥600kgs

Girman: 17 x 6 x 4 cm

Akwatin abu: ƙarfe ko bakin karfe

Kasance dacewa don gyara gyare-gyaren sandwich panel tare da rebar daga mold

dace m tsawo shawarar: 40-70mm

Akwatin mu na maganadisu an yi shi da madogaran neodymium na dindindin, wanda ke da ƙarfi mai ƙarfi sosai.Tare da maɓallin ON/KASHE don sarrafa ƙarfin maganadisu na ciki, tubalan maganadisu na iya kasancewa a wurin aiki ko yanayin rufe, ba tare da samar da wutar lantarki ta waje ba.Lokacin da akwatin maganadisu yana cikin yanayin aiki, saman taɓawa yana riƙe da ƙarfi akan dandamali;Lokacin amfani da lefa don cire maɓallin, yawancin ƙarfin riƙewa yana da kariya kuma an rage shi sosai, don haka ana iya cire akwatin maganadisu cikin sauƙi.

Precast kankare maganadisu akwatin an ƙera don kayyade precast kankare formwork, idan aka kwatanta da gargajiya hanyar screwing goro da sauran inji kayyade hanya, mun sami wadannan abũbuwan amfãni na rufe maganadiso.

BABBAN FALALAR RUFE MAGNETS:

1. Rage rikitarwa da lokacin shigar da tsarin aiki (har zuwa 70%).

2. Universal amfani da taro samar da kankare kayayyakin, da kuma yanki kayayyakin kowane nau'i a kan wannan karfe tebur.

3.Ya kawar da buƙatar waldawa, rufewar maganadisu ba ya lalata dandalin karfe.

4. Yana ba da damar samar da samfuran radial.

5. Ƙananan farashin saitin maganadisu.Matsakaicin dawowar kusan watanni 3.

6. Babban fa'idar maganadisu na rufewa shine cewa ba kwa buƙatar samun nau'ikan nau'ikan nau'ikan samfuran daban-daban, kuna buƙatar samun saiti na maganadisu, adaftar don allon tsayi daban-daban da tebur na ƙarfe.

Akwai maɓallin ON/KASHE a saman abubuwan da ke rufewa.A yanayin aiki, danna maɓallin, akwatin maganadisu yana gyara rufewa akan dandamali da ƙarfi, Ɗauki maɓallin tare da lefa, akwatin maganadisu yana cikin yanayin rufe kuma ana iya motsawa.
(1) Tsotsar akwatin maganadisu yana dogara ne akan kauri da santsin matakin dandamali, mafi kauri da santsi mafi kyau.Kuma karfin juzu'i na gefe ya dogara da tsotsan akwatin maganadisu da juzu'i na yanayin taɓawa.
(2) Biyu sukurori a bangarorin biyu na magnet akwatin za a iya haɗa tare da daban-daban adaftan, gyara daban-daban formworks, kamar karfe kwana, karfe tashar, da dai sauransu.
(3)SAIXIN® magnet akwatin da aka yi da dindindin neodymium maganadiso, A ka'idar, idan MAX aiki zafin jiki ne kasa 80 ℃ da maganadiso ba lalace ko lalata, tsotsa za a dade har abada.

(1) Don guje wa lalacewar akwatin maganadisu, kar a yi karo da amfani da kayan aiki masu wuya don buga shi.Da fatan za a buga da guduma roba idan dole ne a yi amfani da kayan aiki.

(2) Magnet akwatin taba surface ya kamata a kiyaye da tsabta da kuma santsi, kauce wa datti baƙin ƙarfe ko kankare grout shiga cikin akwatin, in ba haka ba da button m digiri za a shafa da maganadisu za a slanted, sa magnet ba za a iya gyarawa a kan. dandamali a hankali kuma tsotson ya raunana.

(3) Kamar yadda tsotsan akwatin maganadisu yana da ƙarfi sosai, don Allah a guji rufe shi zuwa ainihin kayan aiki, kayan lantarki da sauran kayan ƙarfe.Da zarar sun sha tare, yana da wuya a rabu.Ba da shawarar yin akwatin kayan aiki na musamman don kiyaye su.

(4) Akwatin Magnet da ke taɓa saman ya kamata a kiyaye tsabta da santsi koyaushe.Kuma ya kamata a rika mai a lokacin ajiya.Max aiki da zafin jiki na ajiya ya kamata ya kasance ƙasa da 80 ℃, kuma babu matsakaici mai lalata a kusa.Koyaushe bincika idan saman aiki yana gyara dandamali a hankali da maɓallin sassauƙan digiri don tabbatar da amfani na yau da kullun.

(5) Bayan amfani, tsaftace akwatunan maganadisu, kuma saka mariƙin ƙarfe kayan aiki.Kada a yi amfani da mariƙin kayan aikin ƙarfe.